Causes of Kernel Security Check Failure<\/h2>\n
Below are some of the causes of the “Kernel Security Check Failure” issue in Windows 10:<\/p>\n
1. Outdated or Incompatible Drivers<\/h3>\n
Outdated or incompatible drivers can cause kernel security check failure. Your drivers might not perfectly match your current configuration if you’ve recently updated your operating system or installed new hardware components. So, you should update to the most recent versions.<\/p>\n
2. Corrupted System Files<\/h3>\n
“Kernel Security Check Failure” issue in Windows 11 may also be triggered by corrupt or damaged system files. Several things, such as failed program updates, malware infections, or conflicts between different software parts, can cause file integrity issues.<\/p>\n
3. Faulty RAM<\/h3>\n
Faulty or failing RAM<\/a> can cause the \u201c Kernel_security_check_failure \u201d error, which may cause data corruption or system instability. Running a memory diagnostic to identify and fix any memory-related issues is usually the solution.<\/p>\n When your PC\u2019s hardware is overclocked improperly or if the hardware can\u2019t handle the increased performance demands, it can cause the “Kernel Security Check Failure” issue in Windows 11.<\/p>\n The key to avoiding this problem is ensuring that overclocking is done properly<\/a> and that your computer can withstand the higher performance demands.<\/p>\n Hardware issues, such as a failing hard drive, can also cause Windows 10 “Kernel Security Check Failure” error, but they are less common. In such cases, you can exchange the broken hardware parts to regain system stability.<\/p>\n Below, we\u2019ll discuss several ways to fix the stop code kernel security check failure. Go through the solutions and find the one that best solves the problem.<\/p>\n When the Blue Screen of Death<\/a> (BSOD) error occurs, the root cause may be memory issues. You can use Windows built-in memory diagnostics tool<\/a> to help discover memory-related issues. Here\u2019s how to do it:<\/p>\n If the diagnostic found memory problems, you can replace the memory card with a new one. Then, check if the Windows 10 “Kernel Security Check Failure” error \u00a0has been resolved.<\/p>\n Related: <\/strong>How to Check Windows Memory Diagnostic Results<\/a><\/p>\n The Kernel_security_check_failure might be showing on your screen because of a corrupted or damaged hard disk. The Windows in-built CHKDSK utility<\/a> can check and repair hard driver errors.\u00a0 Here\u2019s how to proceed:<\/p>\n After that, type Related: <\/strong>How to Run Hard Drive Diagnostics on Windows PC?<\/a><\/p>\n It’s a good idea to try safe mode to see if the Kernel_security_check_failure error goes away. If the error gets fixed in safe mode, your computer’s software may be the cause. In this situation, deleting the program can usually fix the problem.<\/p>\n Here\u2019s how to boot Windows in safe mode:<\/p>\n When the computer restarts, you\u2019ll see several options. Press If the problem doesn\u2019t show, the cause may be from the software. In this situation, you can systematically enable each program again to identify which one is having issues. You can remove the program<\/a> if it\u2019s causing the issues.<\/p>\n Related: <\/strong>How to Add Safe Mode to the Boot Menu in Windows 10?<\/a><\/p>\n Installing new drivers, out-of-date drivers, or problems with the installed drivers can all cause the kernel security check failure error.<\/p>\n After installing a new hardware driver, you can delete or reinstall the driver if you encounter this problem. Updates to the driver<\/a> are essential if you recently updated from a prior version of Windows to Windows 11.<\/p>\n The kernel_security_check_failure error could appear if the drivers previously used for the earlier Windows version are incompatible with the newer version.<\/p>\n Here\u2019s how to check and update your hardware driver:<\/p>\n Updater your Drivers with Auslogics Driver Updater<\/strong><\/p>\n You can address the kernel security check failure and have a more stable, streamlined computing experience by ensuring your drivers are current.<\/p>\n Auslogics Driver Updater uses manufacturer-recommended drivers. So, all your updated drivers are compatible with your Windows.<\/div>\r\n \u00a0Find out more: <\/strong>Auslogics Driver Updater: New Drivers in One Click!<\/a><\/p>\n You can use the Windows built-in troubleshooter<\/a> to resolve the “Kernel Security Check Failure” issue in Windows \u00a011 . This method can help reduce potential subsequent system crashes.\u00a0 However, it might be unable to restore any lost files or progress caused by the error. Here\u2019s how to run the troubleshooter:<\/p>\n The troubleshooter will run and identify any issues and apply the necessary fixes. Remember that your computer may restart during this process.\u00a0 Wait patiently and check to see if the “Kernel Security Check Failure” issue in Windows \u00a010 error has been resolved.\u00a0 If you\u2019re using Windows 11, open Get Help<\/em>, type If the previous solutions haven\u2019t worked, you can use the System File Checker<\/a> or the SFC scan to fix corrupted system files and other issues. Here\u2019s how to use the SFC scan to resolve the Kernel_security_check_failure error:<\/p>\n The scan may take a while to complete. After it\u2019s done, check to see if the error has been resolved.<\/p>\n To use this method to fix the kernel security check failure error, you must manually build a system restore point first. This process may cause data loss, but it should also help you fix the problem.<\/p>\n However, you won’t be able to use this method if you haven’t already created a restore point<\/a>. If you\u2019ve created a restore point, here\u2019s how to run it:<\/p>\n When the restore process starts, Windows will restart your computer. It\u2019ll take some time to complete the entire process. After, you can check if the error has been resolved.<\/p>\n Related: <\/strong>[FIXED] System Restore Not Working in Windows 10<\/a><\/p>\n Follow the below steps to perform a clean install of Windows 10:<\/p>\n The installation will begin. After the installation, check to see if the BSOD kernel security check failure error has been resolved.<\/p>\n Related: <\/strong>Factors That May Cause Hard Drive Failure<\/a><\/p>\n Antivirus software has a reputation for causing computer issues by getting in the way and interfering with the proper operation of apps and services. You can temporarily disable your antivirus program to see if that removes the Kernel_security_check_failure error.<\/p>\n Auslogics Anti-Malware performs a full system scan to find and eliminate malware, including as viruses, Trojan horses, spyware, and other harmful programs. Eliminating these threats reduces the chance that malware infections may cause the kernel_security_check_failure error.<\/div>\r\n Also read: <\/strong>How to Remove Virus and Other Malware from Windows<\/a><\/p>\n You can trace the “Kernel Security Check Failure” error to outdated or corrupted drivers, viruses, incorrect Windows updates, etc. Fortunately, you can use this guide to solve the problem.<\/p>\n You can fix this problem by updating drivers, starting your computer in Safe Mode, inspecting your disk for faults, resetting Windows, or even reinstalling the operating system.<\/p>\n When you find this error, you must act immediately because failing to do so can result in more critical issues that are expensive and difficult to fix.<\/p>\n Make it a practice to frequently run a virus scan, remove unneeded files, and maintain your drivers up-to-date to keep your Windows PC operating efficiently and avoid the “kernel security check failure” error.<\/p>\n You can use the Auslogics BoostSpeed<\/a> to ensure that your computer runs smoothly and performs best.<\/p>\n4. Overclocking<\/h3>\n
5. Hardware Issues<\/h3>\n
How to Fix Kernel Security Check Failure<\/h2>\n
Solution 1: Check Your Computer for Memory Problems.<\/h3>\n
\n
Windows Memory Diagnostic<\/code>\u00a0in the search bar and click on it.<\/li>\n
\n
\nSolution 2: Check and Fix Hard Drive Errors<\/h3>\n
\n
Command Prompt<\/code> in the search field, right-click, and select Run as administrator<\/em>.<\/li>\nCHKDSK C: \/f<\/code>\u00a0and press Enter<\/code>. Remember that the \u201cC:\u201d refers to the driver letter of the partition to be scanned. So check your driver and insert the letter accordingly.<\/li>\n<\/ul>\nexit<\/code>\u00a0and press Enter<\/code>\u00a0to close the Command Prompt<\/a>. Then, check if the “Kernel Security Check Failure” issue in Windows \u00a010 has been resolved.<\/p>\n
\n
\nSolution 3: Boot Windows 10 in Safe Mode.<\/h3>\n
\n
Windows + I<\/code> to launch Settings<\/em>.<\/li>\n![\"Click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/System-Recovery-Windows-10-1.png\")
\r\n <\/div>\r\n \n
F4<\/code> to start your computer in Safe Mode<\/a> or F5<\/code> to start Safe Mode with Networking.\u00a0 You can start searching for any applications that might be causing the stop code kernel security check failure error in Safe Mode.<\/p>\n
\n
\nSolution 4: Update Your Hardware Driver<\/h3>\n
\n
Device Manager<\/code> in the search field and click to open Device Manager<\/em>.<\/li>\n![\"Search](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/device-manager-disk-drives.png\")
\r\n <\/div>\r\n \n
![\"Right-click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/device-manager-update-driver.png\")
\r\n <\/div>\r\n
\n
\nSolution 5: Use the Blue Screen Troubleshooter<\/h3>\n
\n
Windows + I<\/code> to open the Settings<\/em> window.<\/li>\nTroubleshoot BSOD error<\/code>,\u00a0and follow the screen prompts to resolve the issue.<\/p>\n![\"Troubleshoot](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Troubleshoot-BSOD-error.png\")
\r\n <\/div>\r\n Solution 6: Run System File Checker<\/h3>\n
\n
Command Prompt<\/code> in the search field, right-click, and select Run as administrator<\/em>.<\/li>\n<\/ul>\n![\"Run](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Run-Command-Prompt-As-Admin.png\")
\r\n <\/div>\r\n \n
sfc \/scannow<\/code>\u00a0to run the SFC scan.<\/li>\n<\/ul>\nSolution 7: Run System Restore<\/h3>\n
\n
Create a restore point<\/code>\u00a0and click to open.<\/li>\n![\"Click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/System-properties-System-protection.png\")
\r\n <\/div>\r\n \n
![\"Click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Restore-System-File-and-Settings.png\")
\r\n <\/div>\r\n \n
\n
\nSolution 8: Perform a Clean Install of Windows 10<\/h3>\n
\n
F2, F12<\/code>, etc.<\/li>\n
\n
\nSolution 9: Temporarily Disable Your Antivirus<\/h3>\n
\n
\nConclusion<\/h2>\n