{"id":22647,"date":"2024-08-09T07:41:30","date_gmt":"2024-08-09T07:41:30","guid":{"rendered":"https:\/\/www.auslogics.com\/en\/articles\/?p=22647"},"modified":"2025-04-30T14:31:53","modified_gmt":"2025-04-30T14:31:53","slug":"fix-transmit-failed-general-failure-error","status":"publish","type":"post","link":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/","title":{"rendered":"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message"},"content":{"rendered":"<p>When you run into network problems like the \u201cPing: Transmit failed. General failure\u201d error, pinging can help troubleshoot the underlying issue.<\/p>\n<p>On a Windows machine, we use the ping command to measure an IP address&#8217;s response time and, among other things, analyze the statistics of the reply received.<\/p>\n<p>When you execute the ping command, packets of information are sent to devices on the same network or the Internet to determine whether they are available for connection.<\/p>\n<p>But, what do you do if you send a ping and it returns the error \u201cPing: Transmit Failed. General Failure\u201d?<\/p>\n<p>It can be quite frustrating, especially if you are working on something. The problem is exacerbated by the fact that the notification doesn&#8217;t show additional information describing the error.<\/p>\n<p>But don\u2019t panic. In this post, we show you how to troubleshoot ping failure so that you can get back to your business.<\/p>\n<h2>What Causes the \u201cPing: Transmit Failes. General Failure\u201d Error?<\/h2>\n<p>There are various possible reasons that could cause this problem. Some of the potential ones are as follows:<\/p>\n<ul>\n<li>Outdated network drivers or firmware;<\/li>\n<li>A misconfigured firewall;<\/li>\n<li>Hardware and software issues;<\/li>\n<li>Issues with the <a href=\"https:\/\/www.auslogics.com\/en\/articles\/fix-dns-server-might-be-unavailable\/\">Domain Name System (DNS)<\/a><\/li>\n<\/ul>\n<p>As we noted above, the main reason why the error occurs is not known. Having said that, the following are the most effective solutions to the \u201cPing: General Failure\u201d error. These solutions worked for other users and are worth trying on your PC.<\/p>\n<h2>How to Fix \u201cPing: Transmit Failed. General Failure\u201d<\/h2>\n<h3>Fix 1: Temporarily disable your firewall<\/h3>\n<p>First, you need to check if <a href=\"https:\/\/www.auslogics.com\/en\/articles\/how-to-check-firewall-settings-in-windows-10-pc\/'\">your firewall<\/a> is to blame for the ping general failure error. While this is rarely the case, it&#8217;s worth checking this out since we can&#8217;t exactly pinpoint the source of the problem.<\/p>\n<p>To do that, temporarily disable the firewall and try running the ping command again. If you use Windows Defender as your security solution, here are the steps to follow:<\/p>\n<ul>\n<li>Press the <code>Windows logo key + S<\/code> combination, type <em>Firewall<\/em>\u00a0and select <em>Windows Defender Firewall<\/em>. This will take you directly to the <em>Windows Defender Firewall<\/em>\u00a0page in the Control Panel.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/1-screen1-1.png\" alt=\"Select Windows Defender Firewall\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>While in this window, look for the <em>Turn Windows Defender Firewall on or off<\/em>\u00a0option in the left pane and select it.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/2-screen2.png\" alt=\"Look for Turn Windows Defender Firewall on or off\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Click the radio buttons next to <em>Turn off Windows Defender Firewall (not recommended)<\/em>\u00a0for each network type.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/3-screen-3-1.png\" alt=\"Click the radio buttons next toTurn Windows Defender Firewall on or off \" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\">Turn Windows Defender Firewall on or off <\/div>\r\n<\/div>\n<ul>\n<li>Alternatively, you can simply block all the incoming connections by clicking the checkbox under the option to turn on Windows Firewall.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/4-screen4.png\" alt=\"Check the checkbox under the option to turn on Windows Firewall\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<p>Now check if you\u2019ll run into the ping general failure error. If you do, Windows Defender is not the culprit. Turn it back on to keep your system protected.<\/p>\n<h3>Fix 2: Remove any applications that block HTTP traffic<\/h3>\n<p>If you\u2019ve installed any applications on your Windows machine that could, in one way or another, be capable of blocking HTTP traffic coming to or from your PC, you must uninstall them.<\/p>\n<p>These applications can block your system from pinging the IP address or website that you&#8217;re trying to reach.<\/p>\n<p>Examples of such programs include Simplewall, Peer Guardian, Wireshark, Peerblock, and AnyConnect.<\/p>\n<div class=\"notebox\">\r\n\t<div class=\"notebox__heading\">How to check which applications are blocking HTTP<\/div>\r\n\t<div class=\"notebox__text\"><\/p>\n<ul>\n<li>Open <em>Resource Monitor<\/em> (type it into the Start menu) and navigate to the <em>Network<\/em> tab.<\/li>\n<li>Under the <em>Network Activity<\/em> section, you can see which applications are currently using network connections and identify any that are being blocked or restricted.<\/li>\n<\/ul>\n<p><\/div>\r\n<\/div>\r\n\n<p>Here is how <a href=\"https:\/\/www.auslogics.com\/en\/articles\/how-to-uninstall-programs-in-windows-10\/\">to uninstall the applications<\/a>:<\/p>\n<ul>\n<li>Open the Control Panel, and go to <em>Programs &gt; Uninstall<\/em> a program.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/5-5-1.png\" alt=\"Open the Control Panel, and go to <em>Programs &gt; Uninstall<\/em> a program\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Right-click the suspect program and select <em>Uninstall<\/em>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/6-6-1.png\" alt=\"Right-click the suspect program and select Uninstall.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<p>Additionally, <a href=\"https:\/\/www.auslogics.com\/en\/articles\/5-reasons-to-start-using-a-vpn-as-soon-as-possible\/\">if you&#8217;re using VPN software<\/a>, disable it when testing to check if it\u2019s causing the error.<\/p>\n<h3>Fix 3: Flush your DNS cache<\/h3>\n<p><a href=\"https:\/\/www.auslogics.com\/en\/articles\/view-dns-cache-on-windows-10\/\">Flushing your computer\u2019s DNS<\/a><\/p>\n<p>is an effective solution to the \u201cPing: Transmit failed. General failure\u201d error on Windows 10\/11.<\/p>\n<p>When you clear the DNS cache, the old IP records are deleted, allowing your system to get fresh ones when you access the server. In fact, flushing your computer\u2019s DNS cache from time to time is considered healthy.<\/p>\n<p>Clearing your DNS cache will also reset your Winsock catalog, and this might help to fix the problem. To flush the DNS cache, follow the instructions below:<\/p>\n<div>\n<ul>\n<li>Click the <em>Start<\/em> button in the lower-left corner of your screen.<\/li>\n<li>Once in the <em>Start<\/em> menu, go to the search bar and type <code>Command Prompt<\/code> or <code>cmd<\/code>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2021\/09\/launch-cmd-as-admin-1.png\" alt=\"Click the Start button in the lower-left corner of your screen. Once in the Start menu, go to the search bar and type Command Prompt or cmd.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Right-click on <em>Command Prompt<\/em> in the search results and click on <em>Run as administrator<\/em>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2025\/02\/37.png\" alt=\"Right-click on Command Prompt in the search results and click on Run as administrator.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Once in the <em>Command Prompt (Admin)<\/em> window, enter the following commands one after the other and press <code>Enter<\/code> on your keyboard after each one:<\/li>\n<\/ul>\n<pre>ipconfig \/flushdns<\/pre>\n<pre>ipconfig \/all<\/pre>\n<pre>ipconfig \/release<\/pre>\n<pre>ipconfig \/renew<\/pre>\n<pre>netsh int ip reset c:\\tcp.txt<\/pre>\n<pre>netsh winsock reset<\/pre>\n<\/div>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/11.png\" alt=\"Once in the Command Prompt (Admin) window, enter the following commands one after the other and press Enter on your keyboard after each one.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<p>After running all the commands, close the Command Prompt (Admin) window, restart your computer, and check if your ping issue has been resolved.<\/p>\n<hr \/>\n<p><strong>Related:<\/strong><a class=\"post-item__header-link\" href=\"https:\/\/www.auslogics.com\/en\/articles\/fix-dns-server-might-be-unavailable\/\">[FIXED] \u2018Your DNS Server Might Be Unavailable\u2019 Error on Windows 10<\/a><\/p>\n<hr \/>\n<h3>Fix 4: Remove All Ipv6 and IPv4 Transition Technologies<\/h3>\n<p>Transition technologies have been developed to simplify the task of migrating to IPv6 from IPv4. However, they may cause problems when pinging.<\/p>\n<p>If you&#8217;re using any kind of protocol transition technology on your computer, try disabling it to check if this has fixed the issue.<\/p>\n<p>Here are the steps:<\/p>\n<ul>\n<li>You\u2019ll need to run <em>Windows PowerShell<\/em> as an admin. To do that, press the <code>Windows logo and X<\/code> keys simultaneously and select <em>Windows PowerShell (Admin)<\/em>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Remove-All-Ipv6-and-IPv4-Transition-Technologies-1.png\" alt=\"press the Windows logo and X keys simultaneously and select Windows PowerShell (Admin).\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>You can also run the <em>Command Prompt<\/em> with admin rights. Simply press the <code>Win + R<\/code> keyboard shortcut, type cmd into the text box, and hit the <code>Ctrl + Shift + Enter<\/code> combination.<\/li>\n<li>In the elevated <em>PowerShell<\/em> or <em>Command Prompt<\/em> window, type or paste the commands below one after the other and press <code>Enter<\/code> after each one:<\/li>\n<\/ul>\n<pre>netsh int ipv6 isatap set state disabled<\/pre>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Remove-All-Ipv6-and-IPv4-Transition-Technologies-2.png\" alt=\"In the elevated PowerShell or Command Prompt window, type or paste the commands below one after the other and press Enter after each one\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<pre>netsh int ipv6 6to4 set state disabled<\/pre>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Remove-All-Ipv6-and-IPv4-Transition-Technologies-3.png\" alt=\"In the elevated PowerShell or Command Prompt window, type or paste the commands below one after the other and press Enter after each one\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<pre>netsh interface teredo set state disabled<\/pre>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Remove-All-Ipv6-and-IPv4-Transition-Technologies-4.png\" alt=\"In the elevated PowerShell or Command Prompt window, type or paste the commands below one after the other and press Enter after each one\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Exit the <em>Command Prompt<\/em> or <em>Windows PowerShell<\/em> and restart your computer.<\/li>\n<li>Now check if the ping problem still exists.<\/li>\n<\/ul>\n<h3>Fix 5: Reset your PC\u2019s TCP\/IP<\/h3>\n<p>If you&#8217;re still struggling to resolve the ping general failure error, try resetting your PC\u2019s TCP\/IP to check if it works this time.<\/p>\n<p>Here\u2019s how:<\/p>\n<ul>\n<li>Run the <em>Command Prompt<\/em> or <em>Windows PowerShell<\/em> with admin rights.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-TCP-IP-1-1.png\" alt=\"Run the Command Prompt or Windows PowerShell with admin rights.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Click <em>Yes<\/em> when prompted by the system to grant administrator access.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-TCP-IP-2-1.png\" alt=\"Click Yes when prompted by the system to grant administrator access.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Type or paste the command <code>netsh i i r r<\/code> and press <code>Enter<\/code>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-TCP-IP-3-1.png\" alt=\"Type or paste the command netsh i i r r and press Enter.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Next, type or paste the command <code>netsh winsock reset<\/code> and hit <code>Enter<\/code>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-TCP-IP-4-1.png\" alt=\"Next, type or paste the command netsh winsock reset and hit Enter.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Exit the <em>Command Prompt<\/em> or <em>Windows PowerShell<\/em> and restart your computer.<\/li>\n<\/ul>\n<p>This solution should fix the ping failure error.<\/p>\n<h3>Fix 6: Reset your PC\u2019s hosts file<\/h3>\n<p>If nothing seems to work in your case, you may want to try resetting your computer\u2019s host file.<\/p>\n<div class=\"notebox\">\r\n\t<div class=\"notebox__heading\">What is a computer's Hosts file?<\/div>\r\n\t<div class=\"notebox__text\">A computer&#8217;s hosts file is a local text file that maps IP addresses to hostnames. When a user tries to access a website, the operating system first checks this file before querying DNS servers, allowing for custom or overridden mappings for specific domains.<\/div>\r\n<\/div>\r\n\n<p>Here is the step-by-step guide to reset your computer\u2019s host file:<\/p>\n<ul>\n<li>Go to <em>Start<\/em> and launch <em>Notepad<\/em>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-hosts-file-1.png\" alt=\"Go to Start and launch Notepad.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Paste the following script into a new <em>Notepad<\/em> page:<\/li>\n<\/ul>\n<pre># Copyright (c) 1993-2006 Microsoft Corp.\r\n\r\n# This is a sample HOSTS file used by Microsoft TCP\/IP for Windows.\r\n\r\n# This file contains the mappings of IP addresses to host names. Each\r\n\r\n# entry should be kept on an individual line. The IP address should\r\n\r\n# be placed in the first column followed by the corresponding host name.\r\n\r\n# The IP address and the host name should be separated by at least one\r\n\r\n# space.\r\n\r\n# Additionally, comments (such as these) may be inserted on individual\r\n\r\n# lines or following the machine name denoted by a \u2018#\u2019 symbol.\r\n\r\n# For example:\r\n\r\n# 102.54.94.97 rhino.acme.com # source server\r\n\r\n# 38.25.63.10 x.acme.com # x client host\r\n\r\n# localhost name resolution is handled within DNS itself.\r\n\r\n# 127.0.0.1 localhost\r\n\r\n# ::1 localhost<\/pre>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-hosts-file-2.png\" alt=\"Paste the following script into a new Notepad page\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Go to <em>File &gt; Save As<\/em>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-hosts-file-3.png\" alt=\"Go to File &gt; Save As.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Assign the file an appropriate title (like <em>hosts1<\/em>), and click on <em>OK<\/em> to save it to your preferred location.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-hosts-file-4.png\" alt=\"Assign the file an appropriate title (like hosts1), and click on OK to save it to your preferred location.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Next, open the <em>Run<\/em> command using the <code>Win + R<\/code> shortcut.<\/li>\n<li>Type <code>%WinDir%\\System32\\Drivers\\Etc<\/code> into the text box and press <code>Enter<\/code>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-hosts-file-5.png\" alt=\"Next, open the Run command using the Win + R shortcut. Type the prompt into the text box and press Enter.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Search for the original hosts file here.<\/li>\n<li>Right-click on it and select <em>Rename<\/em>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-hosts-file-6.png\" alt=\"Search for the original hosts file here. Right-click on it and select Rename.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Rename it to something like <em>hostsOLD<\/em> and hit <code>Enter<\/code>.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-hosts-file-7.png\" alt=\"Rename it to something like hostsOLD and hit Enter.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>Now, move the newly created hosts1 file from where you previously saved it to the <em>%WinDir%\\System32\\Drivers\\Etc<\/em> directory.<\/li>\n<\/ul>\n<div class=\"screenshots\">\r\n  <div class=\"screenshots__image-shadow\">\r\n    <img data-src=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/Reset-your-PCs-hosts-file-8.png\" alt=\"Now, move the newly created hosts1 file from where you previously saved it to the directory.\" class=\"lazyload screenshots__image\">\r\n  <\/div>\r\n  <div class=\"screenshots__description\"><\/div>\r\n<\/div>\n<ul>\n<li>You&#8217;ll need to provide administrator permission to move things around.<\/li>\n<li>Now restart your PC and try running the ping command again.<\/li>\n<\/ul>\n<div>\n<h2>\u201cPing: Transmit Failed General Failure\u201d Error: Fixed<\/h2>\n<p>Hopefully, one of these solutions will help you fix the Ping General Failure error. Have you ever run into ping issues?<\/p>\n<p>If yes, how did you resolve them? Share your experience by commenting below.<\/p>\n<h2>FAQ<\/h2>\n<div class=\"faq-box\"><div class=\"faq-box__tabs\"><div class=\"faq-box__tab\">\r\n\t<input id=\"id-1\" class=\"faq-box__checkbox\" type=\"checkbox\" \/>\r\n\t<label class=\"faq-box__label\" for=\"id-1\"><span> What causes the ping command to not execute?<\/span><\/label>\r\n\t<div class=\"faq-box__content\"> The ping command may not run properly for several reasons. Software conflicts, improper settings, hardware problems, firewall restrictions, and network congestion are common causes.\u00a0 The ping command may only be able to send data packets if your machine is linked to the network correctly, either over Ethernet or Wi-Fi.\u00a0 Ping failures can also be caused by improper IP address settings, such as an erroneous gateway or subnet mask, which might interfere with communication. \u00a0As a precautionary measure, firewalls or security software may block ping requests, preventing the command from reaching its intended location.\u00a0 Ping failures can also result from problems with the destination server or website, such as malfunctioning network settings or outages.<\/div>\r\n<\/div> <div class=\"faq-box__tab\">\r\n\t<input id=\"id-2\" class=\"faq-box__checkbox\" type=\"checkbox\" \/>\r\n\t<label class=\"faq-box__label\" for=\"id-2\"><span> What is a general failure?<\/span><\/label>\r\n\t<div class=\"faq-box__content\"> When a ping test encounters a &#8220;Transmit Failed General Failure&#8221; error message, &#8220;general failure&#8221; refers to a wide range of problems that can prevent data packets from being sent.\u00a0 A general failure message means that the ping command encountered an issue, but it is unable to pinpoint the precise cause, compared to specific error codes that identify specific issues.\u00a0 Because of this lack of precision, troubleshooting becomes more difficult because you have to look into a number of potential reasons to find and fix the main problem.<\/div>\r\n<\/div> <div class=\"faq-box__tab\">\r\n\t<input id=\"id-3\" class=\"faq-box__checkbox\" type=\"checkbox\" \/>\r\n\t<label class=\"faq-box__label\" for=\"id-3\"><span> How do I fix ping failure?<\/span><\/label>\r\n\t<div class=\"faq-box__content\"> To fix ping problems, you should first ensure that your Ethernet or Wi-Fi connection is operational and that all your wires are firmly connected.\u00a0 Next, make sure your IP address is configured correctly. Incorrect configurations can cause problems with connectivity. You can also restart your modem or router to refresh the connection.\u00a0 If the issue continues, try pinging various locations to see whether it is unique to a particular server or webpage.\u00a0 Using network diagnostic tools and updating your network drivers can also help you find and address the underlying issues causing the ping failure.<\/div>\r\n<\/div> <div class=\"faq-box__tab\">\r\n\t<input id=\"id-4\" class=\"faq-box__checkbox\" type=\"checkbox\" \/>\r\n\t<label class=\"faq-box__label\" for=\"id-4\"><span> What does ping transmit failed general failure mean?<\/span><\/label>\r\n\t<div class=\"faq-box__content\"> Generally speaking, the error message &#8220;Ping Transmit Failed General Failure&#8221; means a communication issue between your computer and another device or network server.\u00a0 This error shows that the transfer of data packets failed for a general reason, without mentioning a specific cause, when you run the ping command to test connectivity.\u00a0 Numerous network difficulties, including malfunctioning hardware, incorrectly configured settings, or broken connections, maybe the cause.<\/div>\r\n<\/div><\/div><\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>If you&#8217;ve encountered the \u201cPing: Transmit Failed General Failure\u201d error, you&#8217;re not alone. The error is usually due to outdated network drivers, Hardware and software issues or Issues with the DNS. This guide offers solutions to fix the error. Keep reading!<\/p>\n","protected":false},"author":29,"featured_media":92081,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[815,881],"tags":[1039,719,63,23,1105],"class_list":["post-22647","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-maintenance","category-windows-update-errors","tag-dns","tag-errors","tag-firewalls","tag-pc-diagnostics","tag-windows-defender"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.3 (Yoast SEO v27.3) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message &#8212; Auslogics Blog<\/title>\n<meta name=\"description\" content=\"In this post, we will show you how to troubleshoot &quot;Ping: Transmit Failed. General failure&quot; error so that you can get back to your business.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/posts\/22647\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message\" \/>\n<meta property=\"og:description\" content=\"In this post, we will show you how to troubleshoot &quot;Ping: Transmit Failed. General failure&quot; error so that you can get back to your business.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/\" \/>\n<meta property=\"og:site_name\" content=\"Auslogics Blog | Tips to Diagnose &amp; Resolve Computer Issues\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/Auslogics\" \/>\n<meta property=\"article:published_time\" content=\"2024-08-09T07:41:30+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2025-04-30T14:31:53+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"700\" \/>\n\t<meta property=\"og:image:height\" content=\"400\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"author\" content=\"Peter Gichuki\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Peter Gichuki\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"10 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/\"},\"author\":{\"name\":\"Peter Gichuki\",\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/#\\\/schema\\\/person\\\/fcf3efe624f7b6aa8a29b1e2e0af5282\"},\"headline\":\"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message\",\"datePublished\":\"2024-08-09T07:41:30+00:00\",\"dateModified\":\"2025-04-30T14:31:53+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/\"},\"wordCount\":2470,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/wp-content\\\/uploads\\\/2024\\\/08\\\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp\",\"keywords\":[\"DNS\",\"Errors\",\"Firewall\",\"PC Diagnostics\",\"Windows Defender\"],\"articleSection\":[\"Maintenance\",\"Windows Update Errors\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/\",\"url\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/\",\"name\":\"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message &#8212; Auslogics Blog\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/wp-content\\\/uploads\\\/2024\\\/08\\\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp\",\"datePublished\":\"2024-08-09T07:41:30+00:00\",\"dateModified\":\"2025-04-30T14:31:53+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/#\\\/schema\\\/person\\\/fcf3efe624f7b6aa8a29b1e2e0af5282\"},\"description\":\"In this post, we will show you how to troubleshoot \\\"Ping: Transmit Failed. General failure\\\" error so that you can get back to your business.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/wp-content\\\/uploads\\\/2024\\\/08\\\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp\",\"contentUrl\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/wp-content\\\/uploads\\\/2024\\\/08\\\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp\",\"width\":700,\"height\":400,\"caption\":\"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/fix-transmit-failed-general-failure-error\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Tech Wisdom Blog\",\"item\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Maintenance\",\"item\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/category\\\/maintenance\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/#website\",\"url\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/\",\"name\":\"Auslogics Blog | Tips to Diagnose &amp; Resolve Computer Issues\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/#\\\/schema\\\/person\\\/fcf3efe624f7b6aa8a29b1e2e0af5282\",\"name\":\"Peter Gichuki\",\"description\":\"Peter is the kind of guy who can analyze computer code while sipping on his triple shot espresso, effortlessly multitasking without breaking a sweat. With years of experience in the tech industry, Peter has seen it all and fixed it all. One of his major interests lies with the newest trends in antimalware and antivirus protection. Whether you want to troubleshoot your glitchy laptop or navigate through the treacherous waters of cybersecurity, Peter is your go-to guru. Peter\u2019s passion for technology shines through in his writing, with an ability to explain complex concepts in a casual and approachable tone. You can trust that when he writes about tech, you're getting informed advice from someone who truly knows their stuff!\",\"url\":\"https:\\\/\\\/www.auslogics.com\\\/en\\\/articles\\\/author\\\/peter-gichuki\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message &#8212; Auslogics Blog","description":"In this post, we will show you how to troubleshoot \"Ping: Transmit Failed. General failure\" error so that you can get back to your business.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/posts\/22647","og_locale":"en_US","og_type":"article","og_title":"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message","og_description":"In this post, we will show you how to troubleshoot \"Ping: Transmit Failed. General failure\" error so that you can get back to your business.","og_url":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/","og_site_name":"Auslogics Blog | Tips to Diagnose &amp; Resolve Computer Issues","article_publisher":"https:\/\/www.facebook.com\/Auslogics","article_published_time":"2024-08-09T07:41:30+00:00","article_modified_time":"2025-04-30T14:31:53+00:00","og_image":[{"width":700,"height":400,"url":"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp","type":"image\/webp"}],"author":"Peter Gichuki","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Peter Gichuki","Est. reading time":"10 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/#article","isPartOf":{"@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/"},"author":{"name":"Peter Gichuki","@id":"https:\/\/www.auslogics.com\/en\/articles\/#\/schema\/person\/fcf3efe624f7b6aa8a29b1e2e0af5282"},"headline":"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message","datePublished":"2024-08-09T07:41:30+00:00","dateModified":"2025-04-30T14:31:53+00:00","mainEntityOfPage":{"@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/"},"wordCount":2470,"commentCount":0,"image":{"@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/#primaryimage"},"thumbnailUrl":"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp","keywords":["DNS","Errors","Firewall","PC Diagnostics","Windows Defender"],"articleSection":["Maintenance","Windows Update Errors"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/","url":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/","name":"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message &#8212; Auslogics Blog","isPartOf":{"@id":"https:\/\/www.auslogics.com\/en\/articles\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/#primaryimage"},"image":{"@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/#primaryimage"},"thumbnailUrl":"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp","datePublished":"2024-08-09T07:41:30+00:00","dateModified":"2025-04-30T14:31:53+00:00","author":{"@id":"https:\/\/www.auslogics.com\/en\/articles\/#\/schema\/person\/fcf3efe624f7b6aa8a29b1e2e0af5282"},"description":"In this post, we will show you how to troubleshoot \"Ping: Transmit Failed. General failure\" error so that you can get back to your business.","breadcrumb":{"@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/#primaryimage","url":"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp","contentUrl":"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2024\/08\/How-to-Remove-the-Ping-Transmit-Failed-General-Failure-Error-Message.webp","width":700,"height":400,"caption":"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message"},{"@type":"BreadcrumbList","@id":"https:\/\/www.auslogics.com\/en\/articles\/fix-transmit-failed-general-failure-error\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Tech Wisdom Blog","item":"https:\/\/www.auslogics.com\/en\/articles\/"},{"@type":"ListItem","position":2,"name":"Maintenance","item":"https:\/\/www.auslogics.com\/en\/articles\/category\/maintenance\/"},{"@type":"ListItem","position":3,"name":"How to Remove the \u201cPing: Transmit Failed General Failure\u201d Error Message"}]},{"@type":"WebSite","@id":"https:\/\/www.auslogics.com\/en\/articles\/#website","url":"https:\/\/www.auslogics.com\/en\/articles\/","name":"Auslogics Blog | Tips to Diagnose &amp; Resolve Computer Issues","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.auslogics.com\/en\/articles\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.auslogics.com\/en\/articles\/#\/schema\/person\/fcf3efe624f7b6aa8a29b1e2e0af5282","name":"Peter Gichuki","description":"Peter is the kind of guy who can analyze computer code while sipping on his triple shot espresso, effortlessly multitasking without breaking a sweat. With years of experience in the tech industry, Peter has seen it all and fixed it all. One of his major interests lies with the newest trends in antimalware and antivirus protection. Whether you want to troubleshoot your glitchy laptop or navigate through the treacherous waters of cybersecurity, Peter is your go-to guru. Peter\u2019s passion for technology shines through in his writing, with an ability to explain complex concepts in a casual and approachable tone. You can trust that when he writes about tech, you're getting informed advice from someone who truly knows their stuff!","url":"https:\/\/www.auslogics.com\/en\/articles\/author\/peter-gichuki\/"}]}},"_links":{"self":[{"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/posts\/22647","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/users\/29"}],"replies":[{"embeddable":true,"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/comments?post=22647"}],"version-history":[{"count":32,"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/posts\/22647\/revisions"}],"predecessor-version":[{"id":96839,"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/posts\/22647\/revisions\/96839"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/media\/92081"}],"wp:attachment":[{"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/media?parent=22647"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/categories?post=22647"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.auslogics.com\/en\/articles\/wp-json\/wp\/v2\/tags?post=22647"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}