For example, two unique IP addresses will be assigned when you connect a PC and a smartphone to the same network.<\/p>\n
However, it\u2019ll be impossible for the network to distinguish between these devices if they have the same IP address. Your router or your computer’s settings may cause an IP address conflict .<\/p>\n
\n
Also read: <\/strong>\u201cYour IP Has Been Temporarily Blocked\u201d- How to Unblock IP?<\/a><\/p>\n To know how to fix IP address conflict, check the solutions discussed below. Go through them and find the one that best works in your situation:<\/p>\n Your router’s responsibility is to assign unique numbers (IP addresses) to each device connected to your network. Your router may occasionally make a mistake and assign the same number to two devices. You get the “Windows has detected an IP address conflict” error when that occurs. Here\u2019s how to resolve the problem:<\/p>\n Find the power button on your router and switch it off. This will temporarily halt the network and turn off your internet. Wait for a while, maybe five minutes. It generally gives your router and network enough time to rest.<\/p>\n Next, restart your router. Check to see if the problem has been resolved. You should reconnect your devices to the network if the problem is unresolved.<\/p>\n A network adapter<\/a> is the component of your computer that enables communication with a network or the internet. Your computer uses a wireless network adapter if you connect over Wi-Fi.\u00a0 Your PC uses a wired network adapter, typically via USB, if you connect via cable, such as Ethernet<\/a>. If you use a USB or wireless network adapter, disabling and re-enabling it may r esolve IP conflict.<\/p>\n Also Read: <\/strong>How to check the power output of a USB port in Windows 10?<\/a><\/p>\n However, you\u2019ll need local user and administrator permissions to do this. Here\u2019s how to proceed:<\/p>\n This method effectively resolves network issues, especially those involving IP addresses. You can use specific commands to release your current IP address and request that your router provide your device with a new IP address.<\/p>\n Remember that you must have a local user account with administrative rights<\/a> to use this method. Here\u2019s how to do it:<\/p>\n Check whether the \u201cWindows has detected an IP address conflict\u201d error has been resolved. If not, check the other methods below.<\/p>\n Some users or computers prefer static IP<\/a> addresses because they simplify locating particular network devices.<\/p>\n However, when PCs use static IP address, which isn\u2019t supposed to change, the IP address conflict increases. And that\u2019s because other devices can\u2019t change their IP addresses quickly to avoid the complications.<\/p>\n So you can do away with the static IP address. Your computer will have a higher probability of obtaining a functional IP address because it may now accept new ones.<\/p>\n Here\u2019s how to do it:<\/p>\n With the help of the Domain Name System (DNS) server, web browsers can more easily access various websites.<\/p>\n An \u201c IP conflict detected \u201d error may occur if your DNS server<\/a> settings are incorrect or the server is experiencing issues. Fortunately, updating the DNS server address will resolve this.<\/p>\n Here\u2019s how to do it:<\/p>\n Related: <\/strong>[FIXED] Server DNS Address Could Not Be Found on Windows 10\/11<\/a><\/p>\n The Internet Protocol version 6<\/a> (IPv6) is a protocol that the Internet uses to assign IP addresses to devices and direct Internet traffic. The “IP conflict detected ” error may appear when your computer uses IPv6. You can fix this by turning off IPv6 in your device’s settings.<\/p>\n Restart your computer and check if the Windows IP address conflict has been resolved.<\/p>\n You can get a different IP address each time you connect to the internet by using a VPN<\/a>, including your devices.\u00a0 VPNs, such as NordVPN<\/a>, improve your online privacy and security by encrypting your online activity. Additionally, it assigns unique IP addresses to your devices each time you connect to the internet for additional privacy protection.\u00a0 This decreases the likelihood of getting the ” Windows has detected an IP address conflict ” error.<\/p>\n
\nHow to Fix IP Address Conflict<\/h2>\n
Method 1: Restart Your Router<\/h3>\n
Method 2: Disable and Re-Enable Your Network Adapter<\/h3>\n
\n
\n\n
Windows + R<\/code>\u00a0to open the Run dialog box<\/em>.<\/li>\nncpa.cpl<\/code>\u00a0and click OK<\/em> to open the Network Connections<\/em> window.<\/li>\n<\/ul>\n![\"Type](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/07\/disable-IPv66-ncpa.cpl_.png\")
\r\n <\/div>\r\n \n
![\"Click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Disable-Wi-Fi-on-Windows-10.png\")
\r\n <\/div>\r\n \n
Method 3: Release and Renew Your IP Address<\/h3>\n
\n
Command Prompt<\/code>\u00a0in your search bar, right-click, and select Run as administrator<\/em>.<\/li>\n<\/ul>\n![\"Run](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/08\/Run-Command-Prompt-as-Admin.webp\")
\r\n <\/div>\r\n \n
Enter<\/code>\u00a0after each one:<\/li>\n<\/ul>\nnetsh int IP reset c:\\resetlog.txt<\/pre>\n
![\"Command](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Command-Prompt-resetlog.png\")
\r\n <\/div>\r\n ipconfig \/release<\/pre>\n
![\"Command](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Command-Prompt-Release-command.png\")
\r\n <\/div>\r\n ipconfig \/renew<\/pre>\n
![\"Command](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Command-Prompt-renew-command.png\")
\r\n <\/div>\r\n Method 4: Disable or Remove the Static IP<\/h3>\n
\n
Windows + R<\/code>\u00a0to open the Run dialog box<\/em>.<\/li>\nncpa.cpl<\/code> and click OK<\/code> to open the Network Connections<\/em> window.<\/li>\n<\/ul>\n\r\n <\/div>\r\n \n
![\"Right-click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Wi-Fi-Properties-Windows-10.png\")
\r\n <\/div>\r\n \n
![\"Double-click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Windows-Internet-Protocol-Version-.png\")
\r\n <\/div>\r\n \n
![\"Choose](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Open-an-IP-Address-Automatically.png\")
\r\n <\/div>\r\n Method 5: Change DNS Servers<\/h3>\n
\n
Windows + I<\/code>\u00a0to open the Settings<\/em> app.<\/li>\n![\"Click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Advanced-Network-Settings-Windows-10.png\")
\r\n <\/div>\r\n \n
![\"Click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/More-network-adapter-options-Windows-10.png\")
\r\n <\/div>\r\n \n
\r\n <\/div>\r\n \n
8.8.8.8<\/code> in the Preferred DNS server<\/em> field and 8.8.4.4<\/code> in the Alternate DNS server<\/em>\u00a0field.<\/li>\n<\/ul>\n![\"Click](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Internet-Protocol-Verson-Alternate-Configuration.png\")
\r\n <\/div>\r\n \n
\n
\nMethod 6: Disable ipV6<\/h3>\n
\n
Windows key + R<\/code>\u00a0to open the Run dialog box<\/em>.<\/li>\nncpa.cpl<\/code> and click OK<\/code> to open the Network Connections<\/em> window.<\/li>\n<\/ul>\n![\"Type](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2021\/09\/disable-IPv66-ncpa.cpl_.png\")
\r\n <\/div>\r\n \n
![\"Uncheck](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Wi-Fi-properties-Internet-Protocol.png\")
\r\n <\/div>\r\n Method 7: Use a VPN Always to Get a New IP Address.<\/h3>\n
\n