\n
Also Read: <\/strong>How to Run Hard Drive Diagnostics on Windows PC?<\/a><\/p>\n The issue in question is hugely annoying: it makes your system crash, causes you to lose your progress, and leads to permanent data loss, which, in fact, is a huge spanner in the works. To make a long story short, you should fix the stop code bad pool header to make your OS usable again. Here are the steps to do it: <\/p>\n The first fix to be carried out implies disconnecting all your external pieces of hardware: any USB ports<\/a>, flash drives, external hard drives<\/a>, webcams, etc., should be removed. Then, check if the BSOD bad pool header has been resolved. <\/p>\n Now, it is time for you to take a few steps back. For example, <\/p>\n To summarize, you should undo any changes responsible for the current memory malfunction. You can use Auslogics BoostSpeed<\/a> to uninstall any recent updates. It’s the easiest and fastest way to manage everything that happens on your computer. <\/p>\n \n<\/p>\n The point is your non-Microsoft security solution might conflict with your Windows 10. Thus, feel free to disable it to check if it is the culprit. <\/p>\n Related:<\/strong>[EXPLAINED] Does Windows 10 Need Antivirus?<\/a><\/p>\n \nIf the ‘BAD_POOL_HEADER’ error persists, you should check your Windows Update<\/a> for any new updates. Just click on Start<\/em>, then on Settings<\/em>. After, click on Update & Security<\/em> and Windows Update<\/em>.<\/p>\n Finally, click Update Status<\/em> to check for new updates.<\/p>\n If there’s any update, click on it and restart your computer after the updates are completed. Check to to see if the error is resolved. If not, follow the next step.<\/p>\n Related:<\/strong>Ultimate Guide: How to Manually Check and Install Windows Updates<\/a><\/p>\n \nOutdated drivers are certainly not an issue to turn a blind eye to. They make your operating system turbulent and bring about various problems, such as the BSOD bad pool header.<\/p>\n Here are 3 easy ways to update your drivers in Windows 10:<\/p>\n Use Device Manager<\/strong><\/p>\n Your OS is quite a resourceful thing. For instance, it has an embedded Device Manager tool, which can fix your driver issues automatically. Just follow the instructions below to let it do its job:\n<\/p>\n You can constantly update the drivers<\/a> manually by checking the manufacturer’s site for the latest driver software for your device models and installing it on your PC. <\/p>\n Use Auslogics Driver Updater<\/strong><\/p>\n If you do not have time to update your drivers one by one, you can update all of them at once by using Auslogics Driver Updater<\/a>. <\/p>\n The program checks your computer for any outdated or missing drivers and automatically updates them using the drivers’ manufacturer’s recommended updates. <\/p>\n Auslogics Driver Updater also allows you to back up your data before installing new drivers. <\/p>\n This allows you to revert the changes if you don’t like the updates or if the new updates conflict with other programs on the PC. <\/p>\n Related: <\/strong>Auslogics Driver Updater: New Drivers in One Click!<\/a><\/p>\n If the fixes above to resolve the bad pool header blue screen haven’t worked, thoroughly examine your hard disk. It may be the culprit. Here’s how to check your <\/p>\n hard disk drive:\n<\/p>\n \nThe stop code bad pool header error might mean your Random Access Memory (RAM)<\/a> is playing up. Follow the below instructions to check if your RAM has any issues:\n<\/p>\n Try turning off the indexing service<\/a> on your PC to fix the bad pool header blue screen problem. Take a few steps below to check if this method works: <\/p>\n After, check to see if the bad pool header has been resolved.\n<\/p>\n Clean booting your Windows 10<\/a> may help to repair your bad pool header. Here’s how to do it: <\/p>\n See if the BSOD bad pool header problem is present. If it isn’t, the issue in question was caused by one of the disabled programs or services. Enable them one at a time to locate the issue.\n<\/p>\n The bad pool header screen might signify that your registry is corrupt and needs fixing. Please remember that editing is a procedure to be carried out only by an advanced user. <\/p>\n The thing is, you may damage your system beyond repair. <\/p>\n We strongly advise you to use special software to modify your Windows Registry. To get it in tip-top shape, use Auslogics Registry Cleaner <\/a>. This software ensures that your PC’s registry is clean and error-free. <\/p>\n This helps optimize your computer for better performance and improve your PC’s speed if the problem comes from the registry. <\/p>\n Related: <\/strong>Auslogics Registry Cleaner<\/a><\/p>\n If the System Restore<\/a> feature is enabled on your PC, you can configure your system to an earlier state. This trick will get your Win 10 back to when there was no ‘BAD_POOL_HEADER’ to mess things up. Here is how you can use System Restore to your advantage: <\/p>\n Related: <\/strong>[FIXED] System Restore Not Working in Windows 10<\/a><\/p>\n If none of the fixes above has saved your day, you should scan your system for junk, corrupt, or missing system files, incorrect settings, and other issues that can affect its running – this kind of crusade may rid you of the persistent ‘BAD_POOL_HEADER’ error on Windows 10 . <\/p>\n Examining your computer thoroughly requires a lot of time and effort, so you have to learn patience. Or you can use an acknowledged tool to get the work done. <\/p>\n For example, Auslogics BoostSpeed<\/a> will leave no stone unturned to examine every nook and cranny of your OS and improve its performance. <\/p>\n Related: <\/strong>Speed Up Slow Computer: Auslogics BoostSpeed 13<\/a><\/p>\n \nYour operating system might need a fresh start to overcome the Bad Pool Header challenge. Here is how you can perform the necessary maneuver using the built-in reset options in Windows 10<\/a>:\n<\/p>\n Remember that the last two options imply wiping your files off your PC, which means you should back up your important data<\/a> beforehand. <\/p>\n \nWindows 10’s bad pool header error is a frequent problem brought on by memory management issues.<\/p>\n It can be fixed by performing several steps, such as unplugging external devices, undoing recent changes, temporarily turning off third-party antivirus, etc.<\/p>\n These fixes can assist in fixing the BSOD bad pool header issue and restoring your computer’s functionality. You can review the guide and find the one that best fixes the problem.\n<\/p>\n
\nHow to Fix Bad Pool Header in Windows 10?<\/h2>\n
Fix 1: Unplug your external devices<\/h3>\n
Fix 2: Undo recent changes<\/h3>\n
\n
![\"uninstall](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/uninstall-Auslogics-BoostSpeed.png\")
\r\n <\/div>\r\n Fix 3: Temporarily disable your third-party antivirus<\/h3>\n
![\"Windows](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Windows-Security-at-a-glance.png\")
\r\n <\/div>\r\n
\n
\nFix 4: Make Use of the Windows Update<\/h3>\n
![\"View](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/View-installed-Windows-update-history.webp\")
\r\n <\/div>\r\n
\n
\nFix 5: Update your drivers<\/h3>\n
\n
Windows logo + X<\/code> and click Device Manager<\/em>.<\/li>\n![\"Update](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Update-drivers-via-device-manager.webp\")
\r\n <\/div>\r\n ![\"Update](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Auslogics-Driver-Updater-1.png\")
\r\n <\/div>\r\n
\n
\nFix 6: Check your hard disk drive<\/h3>\n
\n
Windows Key + S<\/code> and type cmd<\/code>. Then, right-click on it and click on Run as administrator<\/em>. <\/li>\n<\/ul>\n![\"Opening](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/run-command-prompt-as-admin-1-2.webp\")
\r\n <\/div>\r\n \n
chkdsk.exe \/f \/r<\/code> and press Enter<\/code>. Then, type Y<\/code>. <\/li>\n<\/ul>\n![\"Command](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Command-Prompt-chkdsk.png\")
\r\n <\/div>\r\n \n
Windows 10\/11 (8, 7, Vista, XP)<\/div>\r\n <\/div>\r\n Fix 7: Diagnose your RAM<\/h3>\n
\n
Windows key + R<\/code> to open the Run dialog<\/em> box. <\/li>\nmdsched.exe<\/code> and press Enter<\/code>. <\/li>\n![\"Windows](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Windows-Memory-Diagnostic-1.png\")
\r\n <\/div>\r\n \n
![\"Windows](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Windows-10-Event-Viewer.webp\")
\r\n <\/div>\r\n \n
MemoryDiagnostic<\/code> into the Find<\/em> box. Then click on Find Next<\/em>. You will be presented with the memory diagnostics results. <\/li>\n<\/ul>\nFix 8: Disable indexing service or Windows search<\/h3>\n
\n
Windows key + R<\/code> to open the Run dialog<\/em> box. <\/li>\nservices.msc<\/code> into the Run<\/em> box. <\/li>\n![\"Windows](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Windows-Search-Properties.webp\")
\r\n <\/div>\r\n Fix 9: Perform a clean Windows boot<\/h3>\n
\n
Windows logo + S<\/code>, and type msconfig<\/code> into the Search<\/em> box and then press Enter<\/code>. <\/li>\n![\"System](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/System-Configuration-Windows-10-1.png\")
\r\n <\/div>\r\n \n
![\"Hide](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Hide-all-Microsoft-Services.png\")
\r\n <\/div>\r\n Fix 10: Clean Windows registry<\/h3>\n
![\"Auslogics](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Auslogics-BoostSpeed-13.webp\")
\r\n <\/div>\r\n
\n
\nFix 11: Use system restore<\/h3>\n
\n
Control Panel<\/code>. Then, go to the System and Security<\/em> section. <\/li>\n<\/ul>\n![\"System](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/System-and-security-Windows-10.webp\")
\r\n <\/div>\r\n \n
![\"System](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/System-and-Security-File-History.png\")
\r\n <\/div>\r\n \n
\n
\nFix 12: Run a complete system checkup<\/h3>\n
![\"System](\"https:\/\/www.auslogics.com\/en\/articles\/wp-content\/uploads\/2023\/09\/Optimize-Your-Computers-Startup-Auslogics-BoostSpeed-.png\")
\r\n <\/div>\r\n
\n
\nFix 13: Reset your PC<\/h3>\n
\n
Windows logo + I<\/code> to open the Settings<\/em> window. Then go to Update & security<\/em>.<\/li>\n
Windows 10\/11 (8, 7, Vista, XP)<\/div>\r\n <\/div>\r\n Conclusion<\/h2>\n
FAQ<\/h2>\n