A week ago I posted some Firefox browsing tips. So now I’ll give you some advice on how to speed up Internet Explorer, because let’s face it – it’s still the most used browser in the world.

First of all, the main trick is to clear IE cache. The bigger it gets, the slower your browser becomes. All you have to do is go to Tools - Internet options - go to the General tab and delete browsing history, clear the cache, and remove cookies. That’s it. Alternatively you can just use Disk Cleaner – one of BoostSpeed tools -  to get rid of all the junk in just two clicks.

Internet Explorer can take too long to launch and then load your homepage. So my advice is to set homepage to blank. This will make your browser open faster, because it won’t be loading anything yet. So, if you don’t really need to open the same page every time you start IE, just go to Tools and set your homepage to about:blank.

Sometimes a page loads for ages and you are going bonkers, because you want to view other pages as well. This is not an Internet Explorer problem, nor an Internet speed problem – most likely it’s the page you are trying to load. The solution is easy – just open multiple tabs or multiple windows, whichever you like best, and don’t sit there waiting.

There is one other things that will not only make Internet Explorer fast, but will also make Windows faster.

By default your Temporary Internet Files take up 10% of the hard drive. While this was fine for older PCs with less hard disk space, it doesn’t make sense for new larger hard drives.

To resize your cache:

1. Close all IE and Outlook Express windows
2. Go to Control Panel - Internet options - General tab
3. Click Settings and move the slider to any number you like and click OK. 50MB would be enough.
4. Then click Delete Files and don’t forget to select Delete all offline files. Click OK.
5. After that clear history

Yes, I know, these are really simple tips, but they do make a difference and speed up your Internet Explorer.

There are many ways to improve computer performance, from hardware upgrades to editing the Registry. But upgrading hardware can be quite expensive and editing the Windows Registry can seriously harm your computer if you do something wrong. In this article I’ve focused on simple and safe tweaks that will not cause any trouble and will make your computer run faster.

1) Speed Up Windows Explorer

Sometimes starting Windows Explorer can take a while. This is because Windows automatically looks for network files, shared network folders, and devices when you start Windows Explorer. It is possible to make it open faster by changing the settings:

1. Open Windows Explorer
2. Click on Tools menu
3. Then click on Folder Options
4. Click on the View tab
5. Find Automatically search for network folders and printers check box and uncheck it
6. Click Apply, then click OK
7. Reboot your PC

From now on Windows Explorer will start faster, as it will no longer automatically search for network files, shared folders, and devices in the network.

2) Optimize Appearance Settings

We all are used to how Windows XP looks. But actually its visual effects waste system resources. The graphics card is not the only one that has to deal with it – the CPU and the memory are affected as well. Windows Vista graphics are even more advanced and can dramatically slow down your PC, especially if your computer is not one of the latest and the fastest ones.

Luckily there is a way to configure Windows XP for best performance by reducing the effects in the graphical user interface. This will free up RAM and increase computer speed. To configure Windows XP for maximum performance do the following:

1. Go to Start - Settings and select Control Panel
2. In the Control Panel, click System and then Advanced tab
3. In the Performance Options window select Adjust for best performance
4. Click OK to confirm and close the window

This will turn off all visual effects, which is good for less powerful PCs and laptops. However, if you would like Windows XP to look more like what you’re used to, leave the following boxes ticked:

• Show shadows under menus
• Show shadows under mouse pointer
• Show translucent selection rectangle
• Use drop shadows for icons labels on the desktop
• Use visual styles on windows and buttons

3) Uninstall Unused Device Drivers

Once you have uninstalled a device, it’s a good idea to remove any device drivers that were left behind. Otherwise those drivers will still be using valuable system resources. Here is why this happens.

When you install a device, you also install its drivers and they get called each time you boot up your PC. And even when the device has been removed, but the drivers are still there, your system continues to load them at boot up. What a waste of resources!

If you have Windows XP, follow these steps to remove any unwanted device drivers:

1. Press the Windows key + the Break key on your keyboard. System Properties box will appear
2. Select the Advanced tab
3. 
4. Click Environmental Variables
5. Under System Variables click New
6. In the variable box type devmgr_show_nonpresent_devices
7. Type 1 in the Variable value text box
8. Click OK to return to the System Properties box
9. Click OK again
10. Go to the Device Manager tab
11. Click View – Show hidden devices

Then you will need to expand all the branches and look for washed out icons. Those icons show unused device drivers that you can uninstall.

Once you have found a device driver you wish to uninstall, highlight it, right-click it, and choose Remove. Delete only washed out icons. All the other icons show drivers of connected and used devices. If you delete them, your devices will stop functioning properly.

4) Remove Software You Don’t Need

One more way to speed up your PC is to check what software you have installed and see if you need all the applications or not. To do this click Start - Settings - Control Panel – double-click Add/Remove Programs.

Most likely you will find programs you’ve used only once or twice. Removing them will free up disk space and make your PC run faster.

When Uninstalling Software Fails

Uninstalling software doesn’t always go as smooth as one hopes it would. A very common problem is that some programs don’t remove all their data completely, thus leaving some files behind. These files are called junk files.

Sometimes you have to uninstall the software trial version in order to register the full version. But if the uninstall process is not complete, you might fail to register the program that you have paid for.

If the uninstaller doesn’t work, it may be possible to remove the software manually. This means that you will need to remove all related files and configuration data from your hard disk. Usually software uses the Windows Registry to store configuration information.

Firstly, you will need to find the folder where the program was installed. Most likely it’s the Program Files directory. Locate the software folder and delete it. If it’s impossible to delete some files, try restarting your computer. This will help if the files were used by the system. If you can’t delete the files even after a restart, try booting in Safe Mode (tap F8 during PC boot) and then delete the files.

After that you will need to remove invalid Registry entries. Microsoft offers a free Windows Installer CleanUp Utility to help you do the job. After you’ve installed and opened it, select an application you wish to uninstall from the list. The utility will remove all registry entries related to that software. Double check what applications you select and also backup the Registry in case something goes wrong.

If running Windows Installer CleanUp Utility does not solve the problem, you can use a third party registry cleaner. Be careful and only use well-known software that has received positive reviews and trustworthy awards. There are lots of programs that claim to be great, but in fact they contain malware and spyware, and can damage your computer.

Another way to uninstall software without having to worry about the Registry is to use a software uninstaller. Program uninstallers track down and remove all application-related components from your system, thus ensuring that the software gets completely uninstalled.

Auslogics BoostSpeed contains both an uninstaller and a registry cleaner, plus lots of other useful tools to optimize and protect your system. You can download it from http://www.auslogics.com.

5) Disable Indexing Services

The Indexing Services use large amounts of RAM and can often make a computer pretty slow and loud. This service indexes and updates lists of all the files that are on your computer in order to enable you to search for the files and folders faster. To tell you the truth, this service is not really needed and you can safely disable it.

1. Go to Start
2. Click Settings
3. Click Control Panel
4. Double-click Add/Remove Programs
5. Click Add/Remove Windows Components
6. Uncheck Indexing Services
7. Click Next and then click Finish